Оглавление

Map File Format

In the text below the lines in the map file are marked with a dot.

Only those parameters which can be modified/created by the user are described, parameters which are used for special cases are not described.

The lines in green are optional

The Map File

The lines are in the order they are in the map file.

Header and Version of File

• OziExplorer Map Data File Version 2.1

Title of Map - any text string

• Brisbane Region

Link to map image file

• D:\OziMaps\regional\south.ozf2

Can be 1 of 2 things

• 1 TIFF scale factor - redundant, no longer used and has been replaced by line below
• 1 ,Map Code, - only used for special types of maps - Note - cannot be modified by the user but must be there.

Datum settings

• WGS 84,, 0.0000, 0.0000,WGS 84 - Note - for normal maps only the datum in the first field is used the rest of the parameters are for datum shifts and there is normally no need for these to be modified by the user.

Reserved fields, the lines must be there

• Reserved 1
• Reserved 2

Magnetic Variation entry - degrees,minutes

• Magnetic Variation,,,E

Map Projection

• Map Projection,Lambert Conformal Conic,PolyCal,No,AutoCalOnly,No,BSBUseWPX,Yes

Parameters

1. Map Projection - must match the projection name used in OziExplorer
2. PolyCal - the next parameter is Yes if Polynomial calibration is used and No if not
3. AutoCalOnly - Yes if calibration cannot be adjusted by the user No if it can
4. BSBUseWPX - For BSB images only, Yes if the calibration equations contained in the BSB file are used.

Calibration points, there are always 30
Only 9 points can be modified from within OziExplorer but OziExplorer will use the full 30 if they exist in the .map file.

• Point01,xy, 494, 235,in, deg, 24, 0,S, 148, 0,E, grid, , , ,S
• Point02,xy, 4076, 238,in, deg, 24, 0,S, 154, 0,E, grid, , , ,S
• Point03,xy, 4011, 2854,in, deg, 28, 0,S, 154, 0,E, grid, , , ,S
• Point04,xy, 550, 2851,in, deg, 28, 0,S, 148, 0,E, grid, , , ,S
• Point05,xy, , ,in, deg, , ,S, , ,E, grid, , , ,S
• Point06,xy, , ,in, deg, , ,S, , ,E, grid, , , ,S
• ...
• Point30,xy, , ,in, deg, , ,N, , ,W, grid, , , ,N

Projection setup parmeters, all on one line.

• Projection Setup, 0.000000000, 152.000000000, 1.000000000, 2500000.00, 100000.00, -24.666667000, -27.333333000,,,

Parameters

1. Latitude Origin
2. Longitude Origin
3. K Factor
4. False Easting
5. False Northing
6. Latitude 1
7. Latitude 2
8. Height - used in the Vertical Near-Sided Perspective Projection
9. Sat - not used
10. Path - not used

A marker line, it contains no information but is used as a file marker, must be there

• Map Feature = MF ; Map Comment = MC These follow if they exist

Map Features, there are 3 lines per feature

Line 1 Parameters

1. Number
2. Name
3. Latitude
4. Longitude
5. Show Format - not used
6. Fore Color
7. Back Color
8. Symbol Name
9. Create Waypoint
10. Waypoint Name
11. Format Type - internal use

Line 2 - the link to the picture, if there is no picture a blank line must be there
Line 3 - the description of the feature, if no description the blank line must be there

• MF, 1,MF 1 , -26.557302, 152.679007, 0, 16777215, 16711680, ,1,MF1
• c:\pictures\photo5.jpg
• This is a good camping spot
• MF, 2,MF 7 , -26.713354, 153.249176, 0, 16777215, 16711680,Asterisk.bmp ,1,MF7

Map Comments, there are 2 lines per comment

Line 1 Parameters

1. Number
2. Latitude
3. Longitude
4. Show Format - not used
5. Fore Color
6. Back Color
7. Width
8. Height
9. Font Size
10. Font Style

Line 2 - The text for the comment

• MC, 1, -26.572626, 152.512726, 0, 0, 65280, 68,20,6,0
• Map Comment 1
• MC, 2, -26.661532, 152.633450, 0, 0, 13158342, 182,82,13,1
• Map Comment 2 This is a large map comment
• MC, 3, -26.659946, 152.634492, 0, 0, 13158342, 182,82,13,1
• Map Comment 3

Attached file marker, .plt, .wpt, .evt, .pnt files can be included

• Track File = TF These follow if they exist

The attached files - not limited to just track files

• TF,e:\GpsMap\Data\000_2.plt
• TF,e:\GpsMap\Data\aa_demo1.plt
• TF,e:\GpsMap\Data\000_test.plt
• TF,e:\GpsMap\Data\001_test.plt
• TF,e:\GpsMap\Data\aaa.pnt
• TF,e:\GpsMap\Data\names.pnt

The Moving Map section marker

• Moving Map Parameters = MM? These follow if they exist

Use in Moving Map, if this parameter is set to No then the map will be excluded when looking for a new map to change to when using moving map mode. It does not affect other map find functions.

• MM0,Yes

Number of Map border points (corner markers)
Only 4 points can be set graphically in OziExplorer but up to 100 points can be used when derived from other sources, such as importing BSB charts.

• MMPNUM,4

The x, y pixel location of each border point, there must be an entry for each border point.
These are used by OziExplorer as the map loads to determine the map border points.

• MMPXY,1,494,234
• MMPXY,2,4076,238
• MMPXY,3,4012,2855
• MMPXY,4,549,2852

The lat, lon position of each border point, there must be an entry for each border point.
These values are used in the map find and moving map functions when looking for maps.
If these values are not there then the map will never be found.
If these values do not agree with the MMPXY points (after map calibration is applied) then map finding in moving map will not function correctly.
These values will be overwritten by the calculated value from the above x, y points every time the map is saved.

• MMPLL,1, 147.999332, -23.998496
• MMPLL,2, 154.000701, -23.999946
• MMPLL,3, 154.001025, -28.001546
• MMPLL,4, 147.998983, -28.001469

The scale of the image meters/pixel, its calculated in the left / right image direction.
It is calculated each time OziExplorer is run, the value in the file is used when searching for maps of "more detailed" scale.

• MM1B,170.352987

The lat/lon grid setup

• LL Grid Setup
• LLGRID,No,10 Min,Yes,8421504,255,16711935,10 Min,16777215,8421504,9,1,Yes,x

Parameters

1. LLGRID - identifier
2. Grid On - Yes = display grid
3. Grid spacing - number and unit
4. Autoscale - Yes = autoscale on
5. Degree line color
6. Minute line color
7. second line color
8. label spacing - number and unit
9. label fore color
10. label back color
11. label size
12. label - show on all screens
13. x - ignore

The Other grid setup

• Other Grid Setup
• GRGRID,No,10 Km,Yes,255,16711680,10 Km,16711680,16777215,9,1,Yes,Yes,No,x

1. GRGRID - identifier
2. Grid On - Yes = display grid
3. Grid spacing - number and unit
4. Autoscale - Yes = autoscale on
5. Km line color
6. Meter line color
7. label spacing - number and unit
8. label fore color
9. label back color
10. label size
11. label - show on all screens
12. Clip to neat line
13. No meters shown in label ??
14. Show last 3 digits in label ??
15. x - ignore

The position the map will display when it is opened

• MOP,Map Open Position,3008,2324

The map image width and height - not used, just for information

• IWH,Map Image Width/Height,4440,3590